Tank

If New was selected from Daily Entry the tank will default to the tank selected on the page. Otherwise you will need to select one.

Run Date

Defaults to the current processing date. It can be changed if needed. It cannot be in the future.

Ticket Number

The ticket number can be up to 10 characters and is required. If the number is larger than 10 characters use the rightmost 10 characters (if it is 102301901541A use 301901541A).

Processing Date

This is the date the ticket affects production. For the pumper it is informational only. Main office personnel can change the date if required.

Top Reading

Use the drop-down boxes to select the top reading for the run. It cannot be larger than the tank size.

Bottom Reading

Use the drop-down boxes to select the bottom reading for the run. It must be less than the top reading.

Gravity

The observed gravity from the ticket. It has two places to the right of the decimal and must be between 20 and 50.

Observed Temperature

This is from the ticket and is a whole number between 1 and 120.

Tank Temperature

This is from the ticket and is a whole number between 1 and 120.

BS&W %

This is the BS&W from the ticket. It is entered as a percentage with two decimal places (1.25 = 1.25%). It cannot be more than 2.00%. A warning will be issued if it is above 1.00%.

BS&W Bottom

This is in inches and must be between 0 and 12. It has two decimal places so 2.25 would be entered for 2 1/4”. It is an optional field and is informational only.

Purchaser Barrels

This is the value from the run ticket. It has two places to the right of the decimal and cannot be zero.